What Are The Common Misconceptions About Load Bearing Structural Porch Columns?

When you think about load bearing structural porch columns, surely some common misconceptions exist, which are listed below.

Misconception concerning load bearing capacity of the structural porch columns

Porch ColumnsThe first common misconception is regarding the load bearing capacity of the structural porch columns. Never take it for granted, but consult a structural engineer to know if your concrete columns have the required capability to hold the weight of the roof. While estimating and making a blueprint for the project, it is important to take into consideration the elements like rain water, snow etc., which could add to the overall weight of the roof. If the overall weight of the roof exceeds way too much, it could bring equal problems in the future.

Misconception that alignment of the roof-line header on any part over the top of the column would facilitate the column to bear the load

This is the second widespread misconception that people believe. In fact, it is significant to place the header in the middle (center) of the column – this is applicable for all load bearing applications. The load bearing capacity of the column shaft would be greatly lowered if the header – regardless of its width, is not positioned in the center on the top of the column shaft. Thus, its imperative to position the header in the center on the top of the column.

Misconception that split columns can be put together to create structural columns

This is not true. In fact, split columns are used in two types of specific applications that are –

  • To serve the purpose of a pilaster (half column) which would stand against the wall.
  • To border a structural support.

Thus, its prudent to use split columns for serving the specific purpose for which they are manufactured.

Misconception that column will bear pergola beams in a pergola or free standing application

This statement may sound appropriate as the fibreglass column will bear the weight of pergola, however, there is a big exception to it, as the fibreglass columns can’t support sidelong movement. This type of arrangement could trample down the whole system, particularly, in windy regions or slanting on the free standing pergola. Thus, beneath the footer, it is imperative to install a structural support like that of a steel support or a pressure treat pine wood post. This structural support will rise up through the column and join to the pergola header above. This will shield from the sidelong movement and support the pergola system too.

Misconception that in order to accommodate the slope of the porch, trimming the column at the bottom is not required

In case, slope of your porch is not too much, it won’t be required. Nonetheless, you need to ensure that the load is evenly distributed all over the bottom of the porch column. Suppose, the bottom of the column is not aligned, perhaps, all or most of the load may be supported by just one side of the column, which could be dangerous, and might bring down the entire structure.


Architectural Columns Can Be Used to Beautify Your Home

One of the finest Porch Columns Designsways in which you can make your home look compelling is by installing architectural columns. Regardless of the fact that you install them on your porch or for your interiors, these architectural columns could offer an amazing feel and look to any portion of your home. Grant your home with a spirit of liveliness using these wonderful architectural fittings – for this you can select from various column designs. The primary intention of these columns is to pass on the weight of the construction that is above it to structural elements that are beneath it such as the ground or another storey. Square columns constitute the backbone of your house rendering the core support to the remaining of its structural elements. As most of these structural columns would become noticeable in your house after the construction gets over – makers build ornamented variants of these pillars to make them appear aesthetically appealing. The most recent pillars that are made also offer ornamental pieces. If your house as an attractive doorway arch, these pillars would act as sovereign pieces that offers support to them. You can also notice that some pieces are fixed to the wall. There are two way purposes of porch columns – the first one is they serve as ornamental pieces and the second one is they provide extra structural support for your roof.

There are three parts of cylindrical and square porch columns. The uppermost part of a column is the cap or the capital. It is broader than the pillar itself, enabling it to tolerate the weight of a roof or another storey or an arch. They are obtainable in different styles such as Corinthian, Doric, Tuscan, Composite and Ionic styles. To get an intricate impact, you need to use a Corinthian cap, whereas a simple look is all that you need, you can go for a Tuscan or Doric cap. At the bottom, the pillar would remain straight and the tapers are located somewhat to the top part. Tapering shields/ protects distortions because of the weight it tolerates. In plain or fluted design, you get pillars. You would notice carvings on hardwood columns or high-end stone. Lastly to complete your column, you can select either a Tuscan or a Doric base. Various materials such as marble, stone and precious metals are used to construct classical columns, which is used to erect pillars for ancient buildings. These high end structures are still used by manufacturers today; however, if you want more affordable units, they make use of fiberglass, PVC and treated wood. These units are relatively simpler to make and also they are more tolerant to wear and tear and at the same time they don’t drain your wallet.

Porch Columns Designs

Prior to your material selection, you need to make sure of the purpose that these pillars would serve. If your requirement requires supporting huge weight then stone, marble and hardwood are quite strong and would serve the purpose well. On the other hand, PVC and fiberglass are lightweight materials. Their supporting capability is quite limited, and they can be better used for beautification purposes. Search for units that are insect and weather resistant. Examine that each specific unit doesn’t contain any weak spots, making sure that it can carry the weight you are going to place on it. Also, ensure that the makers meet the most recent building/ construction code standards.

Also, look out for pillars that would be easy to erect/ set-up and have it painted. Get information about the suppliers who offer these products and keep in mind that you don’t sand it prior to painting it. Lastly, you need to find suppliers who would offer lifetime warranty for their products. This will enable you to save considerably on probable repair works or purchasing a new column if anything happens to your installed units. By installing architectural concrete columns, surely you will be able to transform the look and feel of your home making it aesthetically pleasing.

At JCV Pty Ltd., you will get a huge selection of architectural porch columns, pier caps and more. You can get more ideas for home beautification by contacting JCV. You can fill-in an instant Enquiry-Form that appears on the right hand side of the website.

Why to Choose Precast Concrete Columns?

The modern era has brought in much technological advancement and our lives have become easier. In construction also we have made considerable progress. Today, it’s relatively easier to build a huge building with lesser human efforts than compared to several years ago, and the entire construction can be completed more safety as well.

Precast Concrete Columns
Actually, precast construction isn’t all new, as they have their roots way back in history in various forms; but yes, they have certainly advanced much more in the modern times, and today it’s a very comprehensive solution that provides numerous gains. It can help your project to move swiftly and is much simpler in terms of logistics, and at the same time giving you a lot more flexibility to come up with unique designs for the building.

The fundamental idea is that the various portions of the structure are made on the ground, normally in a remote facility, and then put together like massive construction blocks. The advantages of this method are evident – you save more of your time and effort that’s usually involved in complex construction works that take place at high levels, and additionally you create a safer environment for your workers. Compared to directly working at the construction site, assembling and using precast concrete pieces tends to be lots more safer and make things much easier for your workers on the site.

The noticeable advantage is that precast concrete is cheaper and affordable. Typically, the precast concrete pieces that you get are normally standard models, manufactured from moulds that are reused at least hundreds of times, and so their manufacturing tends to be cheaper than erecting a building through the standard procedures. Additionally, as the manufacturer can arrange for their logistics, the material cost is normally lower. In general, suppose you’re searching ways to keep your construction costs lower, perhaps this is one of the finest alternatives available in the market currently. This is precisely the reason why there are so many professionals who are aggressively using precast concrete these days.

JCV Pty Ltd. is the manufacturer and supplier of top quality precast concrete columns, pier caps, porch columns and architectural concrete columns in Sydney. JCV’s capability of manufacturing and supplying top quality products with specialized designs and offering the best personal customer service are the qualities that have facilitated JCV to retain its fair share in a very competitive market. You can rely on JCV for getting high quality precast concrete columns.